AREA51 USB-C TO USB-C 9.5M

AREA 51 Wilton XL Pro+ USB-C to USB-C Tether Cable 9.5m / 31ft

• Uses latest AREA 51 hybrid-optic technology
• Highspeed with even faster transfer speeds
• 300lb rated crush-proof metal housing, IPX4 weather sealed
• Power bridge chipset allows for an outstanding, stable 62ft connection
• Go further distances without needing to use additional cables, extensions or power points
• No power injection points (No need!)

AREA 51 Wilton XL Pro+ is a highspeed tethering cable featuring latest AREA 51 hybrid-optic technology, slimmer, stronger soldered connectors to ensure a stable tether connection. Built to high standards with 300lb rated crush-proof metal housing and IPX4 weather sealing.

Note: To properly connect, ensure label "Output" is connected to the camera port.

Commonly paired with:

Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9.5m / 31ft

To create a Power Bridge for 62ft tethering you must follow the below steps:

1. Computer-end must be plugged in first
2. Then plug in the ANGLED USB-C into the camera and power camera on
3. Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port

If this order of steps is not followed, you will not properly connect at 62ft. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.

Compatibility:

Compatible with most cameras using a USB-C port including, but not limited to:

• SONY A1
• SONY A7R4
• SONY A7R III
• NIKON Z6II
• NIKON Z7II
• LUMIX S1
• LUMIX S1R
• Canon R5

FUJIFILM GFX 100 (Only when connected using with a Sandia XL Pro+)

FUJIFILM GFX 100s (Only when connected using with a Sandia XL Pro+)

AREA51 TETHER CO. 

Cables focus on extreme speed industrial quality cables, featuring premium connectors and superior insulation. AREA 51 cables are rigorously tested to ensure reliable and stable connections, so you can focus more on your close encounters and unexplained phenomena.