AREA 51 Los Alamos PRO+ USB-C Right Angle to USB-C Tether Cable 9.5m/31ft - FujiFilm
- Tight right angle design to ensure a stable tether connection
- Uses AREA51 new hybrid-optic technology
- High-speed cable with faster transfer speeds
- 300lb rated crush-proof metal housing
- IPX4 weather sealed
- Power bridge chipset allows for an outstanding, stable 19m/62ft connection
- Slimmer, stronger soldered connectors
- Extra-long lengths to go further distances without using additional cables, extensions or power points
- 60-day cable failure guarantee
The Pro+ Collection. The newest version of AREA51 Los Alamos Pro+ now supporting all current camera makes and models that use a USB-C to port and is specifically tuned to fully support FUJIFILM GXF100 and GXF100s. This cable does not need extra support cables when using Fuji cameras.
Commonly paired with Sandia XL PRO+ USB-C Female to USB-C Extension Cable 9,5m
To create a Power Bridge for 19m tethering you must follow the below steps:
- Computer-end must be plugged in first
- Then plug in the ANGLED USB-C into the camera and power camera on
- Connect the USB-C straight end from the camera cable into the computer's cable USB-C female port. Connecting the two cables together.
If this order of steps is not followed, you will not properly connect at 19m. If you power the camera down or change the camera batteries, you need to start at Step 1 and go in order of the directions to reconnect.
Compatible with most cameras using a USB-C port including, but not limited to:
- FUJIFILM GFX 100
- FUJIFILM GFX 100s
- Canon R5
- SONY A1
- SONY A7R IV
- SONY A7R III
- NIKON Z6 II
- NIKON Z7 II
- LUMIX S1
- LUMIX S1R
AREA 51 TETHER CO.
Cables focus on extreme speed industrial quality cables, featuring premium connectors and superior insulation. AREA 51 cables are rigorously tested to ensure reliable and stable connections, so you can focus more on your close encounters and unexplained phenomena.
