BRIGHT TANGERINE LEFTFIELD BUD RISER SPACER, C400

Bright Tangerine – Leftfield 3 Bud Spacer for Canon

• Required to attach the Universal BUD Riser (B4003.1036) to LeftField 3 15mm LWS Baseplate (B4003.1034)
• The spacer is designed for cameras such as the Canon C400, C300 Mark III, C80, C70 or C500 Mark II.
• Quick Installation. Mounts with four screws using a standard 3mm Hex Key

Essential for Bright Tangerine’s LeftField 3 system, the BUD Spacer sets Canon cameras (including the C400, C300 III & C80) to standard heights when using the ARRI BUD system with the B4003.1056 – Universal BUD Plate. The spacer combines with B4003.1034 – LeftField 3 15mm LWS Baseplate Core and B4003.1036 – Universal BUD Riser.

Designed to work with the latest Canon cameras, the LeftField 3 BUD Spacer is an essential for integrating Balance Utility Dovetail (BUD) workflows. Coupled with our dedicated 15mm LWS Baseplate and BUD Riser, the spacer ensures that your camera is set to the standard height.

Nothing Out of Left-field

The BUD Spacer connects to LeftField 3 15mm LWS Baseplates. This adaptability means that existing equipment isn’t made redundant, allowing for flexibility in constructing a camera setup for new Canon cameras without entirely new parts. When switching camera systems, only the riser will need to be replaced to set different camera heights.

Ubiquitous Design

Using M4 screws, which are easily installed with a 3mm Hex Key, attaching the BUD Spacer is a quick and easy process. Going on top of your choice of baseplate such as the B4003.1034 – LeftField 3 15mm LWS Baseplate Core and below the B4003.1036 – Universal BUD Riser.

Trademark Quality

Bright Tangerine prides itself on its quality and longevity: all components are built to last. As such, this spacer is future-proofed: made from anodized aluminum for a corrosion-resistant finish, as well as being lightweight and sturdy. Purpose-built for the Canon C400 and C80, your dovetail setup is sure to work with the latest Canon offerings.

A Critical Component

The BUD Spacer must be used with B4003.1036 – LeftField 3 Universal BUD Riser to form the complete system.

Compatibility:

The LeftField 3 BUD Spacer is designed for use within the LeftField 3 system, and is compatible with both the B4003.1034 – LeftField 3 15mm LWS Baseplate and the B4004.1039 – LeftField 3 BUD 15mm LWS Baseplate. It is also required to work with the B4003.1036 – Universal BUD Riser and B4003.1056 – Universal BUD Plate to mount compatible Canon camera systems:

• Canon C300 Mark III
• Canon C400
• Canon C500 Mark II
• Canon C70
• Canon C80

In the Box:

• 1 x LeftField 3 BUD Spacer
• 4 x M4 Screws